# Count the orders that need you

`GET /orders/attention/summary`

OMS API, Orders.

Returns how many orders need you, in total and for each reason: they still owe fulfillment, and nothing moves them on until someone acts. The reasons are those of the `attentionReason` filter of `GET /orders`, which lists the orders behind each count.

**Authentication:** Send `Authorization: Bearer <token>`. Either an identity token issued by the auth service (dashboard flow; requires the selected merchant account id in the `X-Odus-Merchant` header), or a merchant secret key (`sk_...`) for server-to-server calls. Both are sent as `Authorization: Bearer <token>`.

## Responses

### `200`

Type: object (OrderAttentionSummaryDTO).

- `total` (integer, required): How many orders need you: the sum of `reasons`, since each order matches at most one reason. Minimum -9007199254740991. Maximum 9007199254740991. Example: `12`.
- `reasons` (object, required): How many orders need you for each reason, with the same meaning as the `attentionReason` filter of `GET /orders`.
  - `on_hold` (integer, required): Orders your fulfillment provider is holding. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.
  - `charge_failed` (integer, required): Orders your fulfillment provider is holding because it could not charge your prepaid balance or payment method. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.
  - `waiting_on_stock` (integer, required): Orders no provider on their route has every item in stock for. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.
  - `no_route` (integer, required): Orders no fulfillment route sends anywhere. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.
  - `rejected` (integer, required): Orders your provider refused, or that every attempt failed to send. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.
  - `unfulfilled_too_long` (integer, required): Orders your provider accepted 7 or more days ago and has not shipped. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.
  - `aged_out` (integer, required): Aged-out orders (`agedOutAt` is set) that no other reason covers. Minimum -9007199254740991. Maximum 9007199254740991. Example: `3`.

### `202`

The merchant is entitled but its OMS environment is not provisioned yet. Provisioning has been kicked off (exactly once) and is in progress; retry the request — it succeeds once the environment is ready. Returned only for identity-token (dashboard) requests bound to an active-entitled merchant, not for secret-key API calls; any such endpoint can return it while provisioning is underway.

Type: object (ProvisioningInProgress).

- `status` (string, required): Signals the merchant OMS environment is still being provisioned. One of `provisioning`.
- `merchantAccountId` (string, required): The merchant account whose OMS environment is being provisioned. Example: `dAI3aa87ROOeupeBCjNSKCOBOisBCYjB`.

### `401`

No credentials were supplied, or the identity token / secret key is not valid for the target merchant. `type` is `authentication_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `403`

The credentials are valid but lack the permission this operation requires. `type` is `permission_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `429`

Too many requests. The rate limit is applied per client across all operations. `type` is `rate_limit_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `500`

The request could not be completed because of an unexpected error. `type` is `api_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `503`

The request could not be served right now: the API is temporarily at capacity, or a dependency needed to serve the request is unavailable — for every operation the auth service that verifies credentials and resolves entitlement, and on the provisioning routes also the ODUS API the OMS reconciles against. `type` is `api_error`. Unlike a plain 500 the condition is transient rather than a fault in the request, so it is worth retrying with backoff.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `504`

The request exceeded the processing time limit and was abandoned. `type` is `api_error` and `code` is `timeout` — unlike a plain 500 the request may still have taken effect.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

---

Generated from the OMS API OpenAPI document, https://sandbox-oms-api.odus.com/openapi.json. Interactive page: https://docs.odus.com/docs/api/oms/order-controller-get-attention-summary. Every guide and reference: https://docs.odus.com/llms.txt
