# Save the fulfillment routing draft

`POST /fulfillment-routing/draft`

OMS API, Fulfillment Routing.

Saves the tree as the draft, creating the draft if there is none. A draft may be unfinished; it is checked in full when you publish it. Send the `revision` you last read: a save made by someone else since then is not overwritten.

**Authentication:** Send `Authorization: Bearer <token>`. Either an identity token issued by the auth service (dashboard flow; requires the selected merchant account id in the `X-Odus-Merchant` header), or a merchant secret key (`sk_...`) for server-to-server calls. Both are sent as `Authorization: Bearer <token>`.

## Request body

Content type `application/json`, required.

Type: object (SaveFulfillmentRoutingDraftRequestDTO).

- `tree` (object or object or object, required): A step of the fulfillment routing tree.
  - When the value is variant 1:
    - `type` (string, required): One of `segment`.
    - `segments` (array of object, required): Tested in order. The order follows the first segment whose conditions hold. Minimum items 0. Maximum items 50.
      - `name` (string, required): Maximum length 100. Example: `North America`.
      - `match` (string, required): Whether `all` of the conditions must hold, or `any` one of them. One of `all`, `any`.
      - `conditions` (array of object, required): Minimum items 0. Maximum items 20.
        - `field` (string, required): What the condition tests: the ship-to country, or the SKUs of the order. One of `country`, `sku`.
        - `operator` (string, required): `in` and `not_in` take a country. `every_in` holds when every shippable item's SKU is listed; `any_in` holds when at least one is. One of `in`, `not_in`, `every_in`, `any_in`.
        - `values` (array of string, required): Country codes or SKUs, each listed once. Minimum items 0. Maximum items 300. Each item: Maximum length 200.
      - `then` (object or object or object, required): A step of the fulfillment routing tree.
        - Same fields as `FulfillmentRoutingNodeDraftDTO`, described above.
    - `otherwise` (object or object or object, required): A step of the fulfillment routing tree.
      - Same fields as `FulfillmentRoutingNodeDraftDTO`, described above.
  - When the value is variant 2:
    - `type` (string, required): One of `fulfill`.
    - `integrationIds` (array of string, required): Integrations tried in this order. The first that has every shippable item of the order in stock gets the whole order. When none has, the order waits for a restock. Minimum items 0. Maximum items 10. Each item: Minimum length 1.
  - When the value is variant 3:
    - `type` (string, required): One of `not_sent`.
- `revision` (integer, required): The draft `revision` you last read, or 0 when there was no draft. A save made since then is refused, so one editor never overwrites another unseen. Minimum 0. Maximum 9007199254740991. Example: `3`.

## Responses

### `200`

Type: object (FulfillmentRoutingDTO).

- `active` (boolean, required): Whether orders are routed through the live version. While off, the fulfillment routes route them. Example: `false`.
- `revision` (number, required): Counts saves of the draft. Send it back when you save or publish the draft. Example: `3`.
- `live` (object, required, nullable): The live version. Null until one is published.
  - `number` (number, required): Example: `3`.
  - `tree` (object, required): The routing tree exactly as it was published: the same shape as `tree` in Save the fulfillment routing draft. It never changes once published.
  - `publishedAt` (string (date-time), required): When the version was published. Example: `2026-11-10T14:02:00Z`.
- `draft` (object, required, nullable): The tree being edited. Null when there is no draft.
  - `tree` (object, required): The tree exactly as it was last saved. It may be unfinished; no order is routed by it.
  - `baseVersion` (number, required, nullable): The version the draft started from. Null when it started from the routes or empty. Example: `3`.
  - `savedAt` (string (date-time), required): Example: `2026-11-12T09:30:00Z`.

### `202`

The merchant is entitled but its OMS environment is not provisioned yet. Provisioning has been kicked off (exactly once) and is in progress; retry the request — it succeeds once the environment is ready. Returned only for identity-token (dashboard) requests bound to an active-entitled merchant, not for secret-key API calls; any such endpoint can return it while provisioning is underway.

Type: object (ProvisioningInProgress).

- `status` (string, required): Signals the merchant OMS environment is still being provisioned. One of `provisioning`.
- `merchantAccountId` (string, required): The merchant account whose OMS environment is being provisioned. Example: `dAI3aa87ROOeupeBCjNSKCOBOisBCYjB`.

### `400`

The request was rejected. `type` is `invalid_request_error`; when the failure is a validation failure `code` is `validation_failed` and `errors` lists every problem found, with field-attributable entries prefixed by the field’s path.

Type: object (ValidationErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): The first error message from the validation errors. Example: `note must be a string`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.
- `errors` (array of string): Complete list of validation errors.

### `401`

No credentials were supplied, or the identity token / secret key is not valid for the target merchant. `type` is `authentication_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `403`

The credentials are valid but lack the permission this operation requires. `type` is `permission_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `413`

The request exceeded a limit on what this API accepts and was refused before the operation ran, so nothing was created or changed. The body must be under 4 MB. `type` is `invalid_request_error`, and `message` names the limit that was met. Reduce the request below the limit and send it again.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `429`

Too many requests. The rate limit is applied per client across all operations. `type` is `rate_limit_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `500`

The request could not be completed because of an unexpected error. `type` is `api_error`.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `503`

The request could not be served right now: the API is temporarily at capacity, or a dependency needed to serve the request is unavailable — for every operation the auth service that verifies credentials and resolves entitlement, and on the provisioning routes also the ODUS API the OMS reconciles against. `type` is `api_error`. Unlike a plain 500 the condition is transient rather than a fault in the request, so it is worth retrying with backoff.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

### `504`

The request exceeded the processing time limit and was abandoned. `type` is `api_error` and `code` is `timeout` — unlike a plain 500 the request may still have taken effect.

Type: object (ErrorResponse).

- `statusCode` (number, required): HTTP status code. Example: `400`.
- `requestId` (string, required): Unique identifier for the request. Example: `dfc10de3-36bb-4bcc-b081-316216194033`.
- `message` (string, required): Human-readable description of the failure. Example: `An error occurred`.
- `type` (string, required): Coarse, stable classifier for the failure. Present on every error response including 5xx. This is the field to branch on: `statusCode` is too coarse and `message` is human prose that may be reworded. The set is closed and every member is permanent, so it is safe to handle exhaustively. One of `invalid_request_error`, `authentication_error`, `permission_error`, `not_found_error`, `invalid_state_error`, `conflict_error`, `rate_limit_error`, `payment_error`, `api_error`. Example: `invalid_request_error`.
- `code` (string): Fine-grained identifier for the failure, present only where it adds something `type` does not — for example separating a replayed idempotency key from a held lock, or naming the reason a payment was declined. The set is open and grows over time, so treat an unrecognised value as absent and fall back to `type`. Example: `validation_failed`.

---

Generated from the OMS API OpenAPI document, https://sandbox-oms-api.odus.com/openapi.json. Interactive page: https://docs.odus.com/docs/api/oms/fulfillment-routing-controller-save-draft. Every guide and reference: https://docs.odus.com/llms.txt
